Thickness Measurement Probe
Doppler provides an existing solution for most corrosion application sites, providing a complete set of twin- crystal and single-crystal thickness measuring probes for thickness measurement of workpiece, work with Accur 1/3/5 different thickness measuring instruments, to ensure the accuracy of thickness measurement to the greatest extent; besides the measurement of corrosion wall thickness, it can also be used for small diameter pipelines, etc. Measurement and application of tubing, boiler tube wall, penetrating coating, spot weld integrity, probes with different frequencies, contact sizes and special high temperature applications are available for selection.
Specification and Model
| Probe Type | Model | Application | Frequency | Bottom Contact OD | Range | Operation TEMP | Line-out | Connector |
Cable |
Accur-* |
|---|---|---|---|---|---|---|---|---|---|---|
| MHz | mm | mm | C | |||||||
| Twin Crystal |
MT509 | Standard, Normal Through Coating |
5 | 11,5 | 1,5-225 (Through Coating 3~100) |
-20 ~ +60 | Side | Lemo-00 | 1GC0422 | 1 |
| MT5096 | Standard (Normal) | 5 | 11,5 | 1,5-50 | -20 ~ +60 | Top | Microdot | 1GC0515 1GC0516 1GC0520 |
1 | |
| MT211 MT121 MT105H* |
Standard, Normal Standard, Normal Standard, High Temp |
2 1 10 |
0,65 1,12 0,30 |
2-225 8-80 1,2-30 |
-20 ~ +60 -20 ~ +60 0 ~ +500 |
Side Side Top |
Lemo-00 Lemo-00 Lemo-00 |
1GC0422 1GC0422 1GC0422 |
1/5 1/5 1/5 |
|
| MT509H* | Standard, High Temp | 5 | 11,5 | 2-200 | 0 ~ +500 | Top | Microdot | 1GC0478 1GC0514 1GC0520 |
1 | |
| MT211H* | Standard, High Temp | 2 | 16,5 | 3-200 | 0 ~ +500 | Top | Lemo-00 | 1GC0422 | 1/5 | |
| MT506 | Fingertips, Normal Through Coating |
5 | 7,5 | 1,2-225 (Through Coating 5~20) |
-20 ~ +60 | Side | Lemo-00 | 1GC0424 | 1 | |
| MT506L | Fingertips, Normal Through Coating |
5 | 9,5 | 1,2-225 (Through Coating 5~20) |
-20 ~ +60 | Side | Lemo-00 | With Cable 1,2m | 1 | |
| MT102L | Fingertips, Normal | 10 | 3,0 | 1-8 | -20 ~ +60 | Side | Lemo-00 | With Cable 1,5m | 1/5 | |
| MT105 | Fingertips, Normal | 10 | 7,5 | 0,8-50 | -20 ~ +60 | Side | Microdot | 1GC0424 | 1/5 | |
| MT105L | Fingertips, Normal | 10 | 7,2 | 0,8-50 | -20 ~ +60 | Side | Lemo-00 | With Cable 1,5m | 1/5 | |
| MT211L | Fingertips, Normal | 2 | 15,5 | 2-225 | -20 ~ +60 | Side | Lemo-00 | With Cable 1,5m | 1/5 |
| Probe Type | Model | Application | Frequency | Bottom Contact OD | Range | Operation TEMP | Line-out | Connector |
Cable |
Accur-* |
|---|---|---|---|---|---|---|---|---|---|---|
| MHz | mm | mm | C | |||||||
| Single Crystal |
DL-10P6-H | Delayline, Normal | 10 | 7,9 | 0,5-15,5 | -20 ~ +60 | Side | Microdot | 1GC0423 | 3 |
| DL-15P5-H | 15 | 7,9 | 0,25-14,5 | -20 ~ +60 | Side | Microdot | ||||
| DL-20P3-H | 20 | 4,8 | 0,15-6 | -20 ~ +60 | Side | Microdot | ||||
| P-15P3-H(0°) | Pen, Normal | 15 | 2,0 | 0,5-10 | -20 ~ +60 | Top | Microdot | |||
| P-15P3-H(45°) | 15 | 2,0 | 0,5-10 | -20 ~ +60 | 45° Side | Microdot | ||||
| P-15P3-H(90°) | 15 | 2,0 | 0,5-10 | -20 ~ +60 | Side | Microdot | ||||
| MTN506 | Standard, Normal | 5 | 9,0 | 3-50 | -20 ~ +60 | Side | Microdot | |||
| MTN510 | 5 | 14,0 | 3-75 | -20 ~ +60 | Side | Microdot | ||||
| MTN513 | 5 | 17,0 | 3-250 | -20 ~ +60 | Side | Microdot | ||||
| MTN106 | 10 | 9,0 | 3,25 | -20 ~ +60 | Side | Microdot | ||||
| MTN101 | 10 | 14,0 | 350 | -20 ~ +60 | Side | Microdot |
* Contact for 10 seconds and cool to ambient temperature for reuse. Technical specifications are subject to change without notice.
