Precise UT thickness gages Danatronics UPG
Danatronics introduces the first precise thickness gage with colourful AScan.
UPG-07DLCW is hand-held ultrasound precise thickness gage designed for the non destructive testing of majority of materials with the highest range of thickness. If you are measuring steel stripes, fiberglass thickness on ships, titan heads of golf clubs, plastic botles, or pneumatic tyres...
The devices of the UPG-07 series are available in different degrees of equipment including monochromatic, or colourful display, from basic up to the fully equipped device. All thickness gages from this family enable imediate expansion of functions. Therefore in case you will need to turn on the B-scan or the inner memory - your device is ready to use without no need to use the computer.
Unusual functions include:
resolution 0,001 mm
live colourful A-Scan
vibrations and colour change when alarm is on
saving and reverse calling up of the setting
30 Mhz bandwidth
generator of square wave pulses
zoom autotracking
memory with up to 100 000 logs
whole range of modes for demanding applications
adjustment of ranges and gains
avalable in many different models
Specifications:
size: 127 mm (length) x 76.2 mm (width) x 31.75 mm (height)
weight: 230 g
measuring range: 0.10 mm - 508 mm, depends on the material, temperature, and selected probe
calibration range according to the material velocity: 0.508-18.699 mm/μsec.
operating temperature range: -20°C up to +50°C
surface temperature of the material: depends on the probe used from -20°C up to 537°C
battery life: colourful display up to 40 hours (15 hours with backlight), monochromatic up to 200 hours (40 hours with backlight)
battery type: 2 x "AA" alkaline
display: colourful 220 x 170 graphic TFT with s live colour view
displayed information: LOS (los of signal), min, max, large reading while displaying "min" at the same time, velocity, zero, calibration, units, freeze, unfreeze, battery life remaining percentage, gain - low, standard, high, echo-to-echo symbol
resolution: 0.001 mm, 0.01 mm
probe recognition: by the list of probes in the menu
delay line zero mesurement: automatic at turn on with the selected probe - ideal for correcting delay line wear/curvature and for transducer acoustic drift at increased temperatures
saved setting: enables saving up to 30 user profiles for storing of the important parameter settings as for example velocity, gain and range...
measuring modes: type 1, transmission impulse and first bounced echo, type 2, Delay line and first bounced echo type 3, Echo - echo following the interface echo from delay line or water column
outer case: special, spatter resistant, higly resistant plastic with gum coating, backlit keypad for easy measuring
frequency range: 0.5-30 MHz (-3dB)
pulser: square impulse
units: English/metric/microseconds
languages: English, German, French, Spanish, Italian, Czech, Finnish, other
Wave display: live colourful with dynamic colour change according to the alarms, display of thickness in large, live monochromatic waves. See chart for more information.
Rectify: RF, Full Wave, Half Wave+, Half Wave -
Blanking: Main Bang Blank and Blank After First Received Echo
Gain: auto or manual in 1 dB steps for varying test conditions of the B-scan measuring:
Funftion | UPG-07B | UPG-07 | UPG-07DL | UPG-07DL W | UPG-07C | UPG-07 CW | UPG-07DL CW |
---|---|---|---|---|---|---|---|
Display type M=mono, C=colour | M | M | M | M | C | C | C |
Measuring range | 0,102 - 20mm | 0,102 - 20mm | 0,102 - 20mm | 0,102 - 20mm | 0,102 - 20mm | 0,102 - 20mm | 0,102 - 20mm |
Repeating frequency | 20 Hz | 20 Hz | 20 Hz | 20 Hz | 20 Hz | 20 Hz | 20 Hz |
Hold mode | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Freeze mode | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Backlit keypad | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Units | in/mm/µsec | in/mm/µsec | in/mm/µsec | in/mm/µsec | in/mm/µsec | in/mm/µsec | in/mm/µsec |
Gain | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Differencial measuring | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Alarms (with vibrations) | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
B-Scan | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
A-Scan | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Inner memory | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Carrying pouch | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Main bang blanking | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Interface blanking | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Setting saving mode | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
function is available,
function is not available,
function is optional


