full service NDT since 1990

UV Lamp UF23 DuoLED

The PTS UF23 DuoLED is an all-aluminium handheld UV-A lamp with two UV-A LEDs and three white LEDs, which immediately deliver a maximum power of more than 5 400 µW/cm². For NDT needs, the body is equipped with a spray holder.

 

UV lampa UF23 DuoLED 01UV lampa UF23 DuoLED

When switched on with the rocker switch on the back of the lamp, you immediately get a maximum lamp power of more than 5 400 µW/cm². Use this switch to switch between UV-A LEDs and white LEDs. The lamp is battery-powered, it lasts at least 4 hours of continuous work. The body is made of aluminium alloy (unibody) for better heat dissipation. The lamp is powered by an internal lithium-ion battery pack consisting of two cells with a capacity of 3200 mAh, which is not user-replaceable.

UV lampa UF23 DuoLED 03UV lampa UF23 DuoLED

 

The indicator diode will show you the status of the built-in batteries with its colour as follows (it only works when the UV-A part is switched on):
(No indication is lit at battery charge level 0-5 %)

 

the indicator light is green

battery charge is between 40-100 %

the indicator light is yellow

battery charge is between 25-40 %

the indicator light is red

battery charge is between 5-25 %
Our recommendation is to charge the lamp at the yellow signal, i.e. when the battery is below 40 %. This will significantly extend its service life.

The UF 23 DuoLED also includes an intelligent charger that, when connected to the lamp, measures the voltage of the built-in battery and starts charging. Charging takes only 1.5 hours at 90%, which is recommended. It takes about another 3 hours to charge to 100%, but we don't recommend it. Li-Ion technology batteries do not like to be fully discharged or fully charged. Fast charging up to 90% is indicated by a fast blink on the charger. The internal battery pack and charger are included. The lamp can also be used continuously connected to the charger. The intelligent electronics in the charger take care of overheating protection.

 

Technical parameters

material used / LED body: aluminium alloy, anodized
handle: ABS plastic
LED: 2x UV Nichia 3 W
UV-A wavelength 365nm±3nm
intensity at 40 cm [µW/cm²] 5.400
white light (part of UV-A radiation) [lux] do 10
illuminated area at a distance of 40 cm [mm] Ø120
continuous operating time [hours] more than 4
charging time [hours] about 1.5 to 90%
dimensions[mm] 170 x 170 x 70
 weight [kg] 0,85
battery pack 2 x typ 18650 Li-Ion; 3,7V; 3200mAh

 

We optionally offer calibration of this lamp.

UV lampa UF23 DuoLEDUV lampa UF23 DuoLED

UV lampa UF23 DuoLEDUV lampa UF23 DuoLED

UV lampa UF23 DuoLEDUV lampa UF23 DuoLED

 

Ask what you are interested in, call or use the contact form at the bottom of the page.

 

Send an Email. All fields with an (*) are required.
Address: PTS Josef Solnař s.r.o.
  U Hrůbků 170
  709 00 Ostrava Nová Ves
  Czech Republic
Phone: +420 596 744 163
Mobile: +420 777 175 174
E-mail
Save
Cookies user preferences
We use cookies to ensure you to get the best experience on our website. If you decline the use of cookies, this website may not function as expected.
Accept all
Decline all
Marketing
Set of techniques which have for object the commercial strategy and in particular the market study.
Sumo
Accept
Decline
Funkční
AddThis
Accept
Decline
Analytics
Tools used to analyze the data to measure the effectiveness of a website and to understand how it works.
Google Analytics
Accept
Decline