full service NDT since 1990

UT Test Blocks

We supply a whole range of calibrating test blocks for UT method.

The material for production of the test blocks is tested before further processing. The roughed samples are heat processed and is tested for its acoustic features. All testing blocks are provided with a certificate and are placed in a suitable case.

Gauges standardly used for UT method

Test block indicationShape
(not in scale)
TypeDescription - usageMeets the requirements of normMaterial, size
V1 blok1 A2
(BS)
I.I.W. Calibrating test block. For calibration of angle an direct probes. For calibrating of direct and angle probes.  Verification of refraction angle, point of output, sensitivity and distinctive abilities. Adjustment of the time base range and sensitivity calibration. B.S. 2704
DIN 54120
IIW (International Institute of Welding) EN 12223
Steel 25x100x300mm
(selection of of the drill hole diameter) blok3 (BS) Small calibrating test block for verification of angle probes qualities, time base range and thickening on spot. The diameter of the drill hole 1.5mm or 5mm. BS 2704
IOW (Institute of Welding)

EN 27963

Steel
12.5x43x75mm
V2/20
(selection of the drill hole diameter)

blok4

A4
(BS)

In general similar to the V2. The bigger thickness of the test block minimalizes the influence of the bounces from side walls. Drill hole diameter 1.5mm or 5mm.

BS 2704

EN 27963

Steel

20x43x75mm

 

UT Test blocks V1Kalibrační měrka V1

UT Test blocks V2/20UT Test blocks V2/20

Special gauges we include for gauges review are not standardly included in our portfolio

Test block indicationShape
(not in scale)
TypeDescription - usageMeets the requirements of normMaterial, size
V1/50 blok2 A2
(BS)
In general similar to V1. The bigger thickness of the test block minimalizes the influence of the bounces from side walls. BS 2704 Steel 50x100x300mm
  blok2   MIN IIW TEST BLOCK   Steel 25x50x150mm

BCB

blok5

(BS)

„Beam Calibration Block”. Designed for the profile verification of hte sound bundle and differenciating of the abilities of the angle probes. It is suitable for sensitivity verification of the angle and direct probes. Contains 9 drill holes with diameter of 1.5mm.

BS 2704

Steel

50x75x305mm

A6

blok6

A6
(BS)

Designed for evaluation of the dominant frequency, length of the impulse, dead zone, penetrating abilities of the direct and angle probes in concord with BS 4331 část 3,1974.

BS 2704

Steel

25x50x150mm

RTB

blok7

(BS)

Designed for verification of the differenciating abilities of angle probes in concord with BS 4331 part 3, 1974. Grades 2,3,4 and 5mm.

BS 2704

Steel

ø74mm radius
75mm thickness

LSW

blok8

 

Step test block for adjusting the time base of the direct probes and for measuring of the wall thickness. 8 steps from 1mm to 8mm.

Toleration field +0.000mm-
-0.040mm

Steel

8x15x120mm

LSW/M

blok9

 

In general similar to the LSW with 15mm diameter of the steel cylinders placed in plastic case. 8 steps from 1mm to 8mm.

Toleration field +0.000mm-
-0.040mm

Steel cylinders in plastic case

10x20x140mm

CSW

blok10

 

Step testing block with curved surfaces for adjusting the time base for direct probes and for measuring if the wall thickness. 5 steps - 2,4,6,8 and 10mm.

Toleration field +0.000mm-
-0.040mm

Steel

100mm length x ø30mm inner diameter of the quadrant

MU

blok11

 

Metric universal test block for general verification of the qualities of the tested material system as at the block V1.

Tolerating proportions: 0.1mm

Steel

20x50x150mm

TBR 2 125 (3)

blok12

 

Curved test block designed for calibration of kettle probes. 3 drill holes with diameter 1.5mm.

Tolerating proportions: 0.004 inch

Steel

20x25x165mm

TBR 2 125 (5)

blok13

 

Substitution of the test block TBR 2 125(3) - with 5 holes with diameter 1.5mm

Tolerating proportions: 0.004 inch

Steel

20x25x165mm

A5 Blank Type B

blok14

ESI

Determination of signal curve and characteristics of the simple probe sound beam (wider range). Diameter of the drill hole 1.6mm.

ESI 98-7

Steel

50x75x305mm

A5 Blank Type C

blok15

ESI

Determination of signal curve and characteristics of the simple probe sound beam (wider range). Diameter of the drill hole 1.6mm.

ESI 98-7

Steel

50x75x305mm

ESI-BCB
N-A5

blok16

ESI

Verification of the dual probe sensitivity. Contains 4 more 1.5mm big drill holes in the A5 test block.

ESI 98-2

Steel

50x75x305mm

50 RAD

blok17

ESI

Verification of the shape of the angle test block impulse.

ESI 98-2 and
ESI 98-8

Steel

50x75x150mm

ASME
(specified by the thickness)

blok18

ASME

Setting of the thicknening level for welding connections. The dimensions and position of the artificial reflectors is based on the known thickness of the basic material of the welded connection.

ASME Article 5 Fig T-546.1

Ocel

corresponding dimensions

 

ASME/M
(optional thickness )

blok19

(ASME)

Metric euivalent of the ASME referencial test block.

Dimension allowance 0.1mm

Steel

Dimensions derived from the thickness of the welded connection

DAC
(optional thickness)

blok20

SPECIAL

Setting of the DAC characteristics for angle and direct probes. The diameters of the artificial reflector typically 1.5mm of 20%, 40%, 60% and 80% the test block thickness.

Dimension allowance 0.0004 inch

Steel

Dimensions comparable to the tested thickness.

Ask yourself what you are interested in, call or use the contact form at the bottom of the page.

Send an Email. All fields with an (*) are required.
Address: PTS Josef Solnař s.r.o.
  U Hrůbků 170
  709 00 Ostrava Nová Ves
  Czech Republic
Phone: +420 596 744 163
Mobile: +420 777 175 174
E-mail
Save
Cookies user prefences
We use cookies to ensure you to get the best experience on our website. If you decline the use of cookies, this website may not function as expected.
Accept all
Decline all
Marketing
Set of techniques which have for object the commercial strategy and in particular the market study.
Sumo
Accept
Decline
Funkční
AddThis
Accept
Decline
Analytics
Tools used to analyze the data to measure the effectiveness of a website and to understand how it works.
Google Analytics
Accept
Decline