ET Magnetizing Yokes
Magnetizing yoke provides a strong DC magnetization that is necessary when parts from ferromagnetic materials are tested by eddy currents in NDT or in production lines.
ET coils - sensors
Eddy current coils are intended for nondestructive testing of products – pipes, bars and complex section products by eddy current method.
Adapters and nozzles for eddy-current coils
Additional equipment for eddy-current coils and magnetic yoke. It is used in lines of nondestructive testing by eddy-current method and allows to use eddy-current coils of various sizes with the corresponding magnetic yoke.
Eddy Current Defectoscope DVP-102
DVP-102 is special device working on the principle of eddy currents, which serve as detection of incompactness mostly on "long" products with different profiles.
ET-K indicator of pipes’ ends
ET-K indicator of the pipes’ ends under coating layer – special device operation of which is based on eddy-current principle. It is used to indicate ends of pipes under PVC coating.
WeldCheck 3
The WeldCheck 3 is a dual-frequency eddy current flaw detector, with conductivity, which means that the instrument can be used for dual and single frequency applications.
ViCTor
"Value for money" eddy current flaw detector for component testing i on-line applications.
Veescan
Veescan product range offers our clients the choice of systems for both optimised productivity and value for money or maximum flexibility combined with Lowest capital cost.
AeroCheck
Designed specifically for Non Destructive Testing n the Aerospace industry, the AeroCheck offers NDT inspectors a lightweight, easy to use solution for NDT inspection.
Vantage G2
The VANTAGE G2 is EThers’ second generation handheld fully featured Eddy Current Flaw Detector, which allows true single hand operation, leaving the operators other hand free to scan with a probe.
WeldCheck
The WeldCheck EC Flaw Detector is lightweight, compact and cased in tough aluminium alloy Mg Si 0.5 powder-coated outer case and has been designed with the nend user in mind.
ETi-200
The ETi-200 is designed to offer advanced multi-frequency and multi-channel flaw detection housed in the smallest portable EC package on the market.
SigmaCheck 2 - conductivity meter
The SigmaCheck 2 is the conductivity meter from ETHER NDE.
VANTAGE-Eddy Current Flaw Detector
The ETher Vantage is a handheld, full featured Eddy Current Flaw Detector, which allows for single handed operation, leaving the operator free to use the other hand to scan with a probe.
UT probes PTS
Ultrasound probes PTS for ultrasound defectoscopes and thickness meters are characterized especially by excellent sensitivity, accuracy and reasonable price.
Normal Beam Probe
A single crystal transducer, Sound Wave Vertical Incidence and direct contact.
Dual Element Probe
Independent transmit and receive crystals, and creates a creates certain focal length in workpiece.
Angle Beam Probe
Refracting ultrasonic beams and generate shear or longitudinal waves to workpiece through a fix angle of delay line.
TRL Angle Beam Probe
Independent transmit and receive crystals, refracting ultrasonic beam angles and creates certain focal length in workpiece.
Delay Line Probe
With replaceable delay line at the front of probe, and Sound Wave Vertical Incidence into workpiece.
TOFD Probe
TOFD Probe and Delay Line can generate refracting longitudinal in steel, and use time of flight diffraction technique to determine the cracks.
Normal Shear Wave Probe
The normal shear wave probe is a single-element transducer that directly contacts the workpiece and generates transverse wave by vertical incidence.
Soft Protective Membrane Probe
Replaceable protective films,Sound Wave Vertical Incidence and direct contact with workpiece.
Spot Welding Probe
The spot welding probe is a single element transducer that contacts the workpiece through a specific water column.
Immersion Probe
Probe is design for total or partial immersion into water or other liquids to create ultrasonic beams.
High Temperature Probe
Single crystal probe with a replaceable delay line, applied for high temperature detection environment.
Thickness Measurement Probe
Doppler provides an existing solution for most corrosion application sites, providing a complete set of twin- crystal and single-crystal thickness measuring probes for thickness measurement of workpiece, work with Accur 1/3/5 different thickness measuring instruments, to ensure the accuracy of thickness measurement to the greatest extent; besides the measurement of corrosion wall thickness, it can also be used for small diameter pipelines, etc. Measurement and application of tubing, boiler tube wall, penetrating coating, spot weld integrity, probes with different frequencies, contact sizes and special high temperature applications are available for selection.
High Frequency Probe
High frequency probe refers to a single element transducer with a frequency higher than 20MHz, which includes HF contact probe, HF immersion probe and HF immersion self – focusing probe.
UT Flaw Detector CTS-9006 SIUI
SIUI CTS-9006 is universal digital ultrasonic flaw detector, for extraordinarilly affordable price.
More Articles …
- Danatronics ECHO 9
- Danatronics EHC-09 / EHC-09 Color Wave
- Precise UT thickness gages Danatronics UPG
- Ultrasonic Thickness Gage TM-8818
- Ultrasonic thickness gauges SIUI
- Ultrasonic Corrosive Thickness Gauge TM-8812
- UT thickness gages DigiCheck
- Ultrasonic Thickness Measuring
- Couplant Gel VG-T
- Couplant Gel Ankoril
